The GE Simon XT is what is commonly called an “all-in-one” Home
Security System. It allows you to protect up to forty different zones,
meaning you can use up to forty different wireless transmitters,
including a wide selection of Door and Windows transmitters from
“micro contacts to standard contacts and even recessed contacts”,
Motion Detectors, Carbon Monoxide Detectors, Freeze Detectors, Smoke
Detectors, Glass Break Detectors, Panic Buttons, and Wireless Key
chain Remotes called “Key fobs”, the list goes on and on.

There are two different common kits for the GE Simon XT Home Security
System. The “the Deluxe Kit” or the “Starter Kit”. The Starter Kit is
just a basic Security System with the core required components, but no
sensors.

The Starter Kit includes:
1) – GE Simon XT alarm system main console
1) – Plug in power transformer
1) – Transformer cord with terminals
1) – 24 hour system backup battery
1) – RJ31X telephone jack and cord set
Installation manual, user manual and user DVD

The deluxe kit has everything that the starter kit does, plus includes
several sensor and a remote.

The Deluxe Kit includes:
1) – GE Simon XT alarm system main console
1) – Plug in power transformer
1) – Transformer cord with terminals
1) – 24 hour system backup battery
1) – RJ31X telephone jack and cord set
1) – Wireless Pet Immune Motion Sensor (60-807-95r / NX-481
3) – Wireless Door / Window Transmitters (60-670-95R / NX-450
1) – Four button keychain remote (60-659-95R / NX-470)
Installation manual, user manual and user DVD

Unless you are just dead set on using different door / window sensors
than those that come in the deluxe kit, such as the recessed type, the
Deluxe Kit it is definitely going to save you a lot of money and is
probably the way to go.

My impressions…
I’ve been playing with one of these Simon XT Deluxe Kits for a couple
months now and I have to tell you, I am impressed! I normally prefer a
hardwired system and have had a preference for DSC ever since the
Power Series came out about 12 years ago, but I must say I like this
little wireless alarm system! Not only is setup and installation a
breeze, I expected that, but this system has some very nice features.

Before I get into the installation and setup portion of this review, I
want to discuss features and basic specs. Firstly, the GE Simon XT
will do everything any other security system will do and then some. It
features up to 40 wireless zones and up to two can be hardwired.
Wireless range in open air is rated at 500 feet without repeaters. It
can be professionally monitored by any central station and includes
two way voice capability.

Unique to the Simon XT, it also has a built in voice dialer that can
call you directly if you want to forgo monitoring fees and self
monitor. This is a huge positive to many people as it can save you $20
or $30 a month in monitoring service fees. The Simon XT also features
voice prompted menus and you can even call into this system remotely
to check status and arm or disarm the system.

Other features include one master code and eight user codes, a chime
feature for monitoring opening and closing of doors and windows while
in disarmed state and it has a built in siren with the capability to
add an external hardwired siren. Also, new to the XT from previous
Simon versions is the addition of an LCD display which is very
informative and looks great.

So what sets it apart from other systems on the market? The built in
voice dialer for self monitoring for one. I don’t know of any other
system at this writing that has that capability out of the box. Other
nice features that many systems don’t have out of the box is the voice
prompting menus and the ability to remotely call into the system and
control it from any touch tone phone. And no dedicated line is needed
to do this I might add.

What’s missing? Very little really. GE has done an excellent job with
the Simon XT overall and I find it plenty capable for any home or
small business that doesn’t want or have the ability to use a
hardwired system. The only missing thing I can see is X10 home
automation support. This is not a security feature, but is an option
on most security systems these days. That said though, GE does have
plans for adding this feature in the near future. Next up,
Installation and setup…

Because it’s all wireless installation is really a snap. More
important than that however is that programming and setup is a snap
too. You can literally install this system start to finish in less
than an hour. I find that the manuals are excellent compared to other
systems, however if you want to dive right in and skip the wordy
manual, see our quickstart programming guide here on our site,
courtesy of AlarmSystemStore.com.

This really is a system that anyone can install and setup. To prove
that theory I had my wife try programming it without any help from me.
Now, let me preface this by saying that my wife is not technical at
all and can barely use her cell phone. It’s not because she’s dumb,
but she just lacks interest in gadgets in general and certainly
doesn’t care to take the time to read a manual! As such, I gave her a
copy of the quick start programming guide and a promise of dinner out
as an incentive to peek her interest and to help me evaluate the true
easy install and setup claims that are commonly stated for this
system.

I did not have her mount any of the sensors because we all know anyone
can do that. You can use double sided tape if a drill scares you… My
instructions to her were, set one sensor to have a 30 second delay,
the other two to be instant and the motion to be as a bypassable
motion and of course the remote to work as the buttons indicate. I
also told her to change the default master code to a number of my
choosing.

So how did she do? Well, better than expected really. From the moment
that she picked up the quick start program guide to completion I
clocked her at a little over 15 minutes. But did she have it right….
YES, she did! I checked her work and found everything done as it was
supposed to be. Conclusion – So easy a caveman can do it… or your
wife, LOL.

All in all I really like the new GE Simon XT and I can’t say that I
was a fan of earlier versions of this system. The new XT version is a
hit though. I have to say, if I was installing a system in my home
today, I would probably go with this system based on it’s rich
features out of the box more than anything else. The only caveat being
that wireless is more expensive than hardwired. That said though, I
think I’m done crawling in attics and crawl spaces. To me at this
point and age in my life the extra expense of wireless would be worth
it.

Many people worry about the reliability of a wireless alarm system,
but as a security professional and former installer, I can tell you
from experience, don’t. Sure wireless 15 years ago was of poor quality
and I wouldn’t use it then, and that’s why UL wouldn’t approve it then
either, but today’s wireless security systems and sensors are a whole
different animal than they were then. The data sent back and forth is
encrypted and the sensors all send in periodic “health” and status
checks to the main console to insure that they are alive and kicking
as they should be. I can tamper with a wire nowadays easier than I can
an encrypted and supervised wireless signal. The GE Simon XT is a fine
system and I have no problem in recommending it to friends and family.